It gets a lot easier to figure out when you say 12 mm instead of 15/32
inches ;)
https://www.aliexpress.com/item/32441351525.html
https://www.ebay.co.uk/itm/4-X-SELF-ADHESIVE-STICK-ON-RUBBER-FEET-12MM-X-4MM/322168561731
You want about 3.5 to 4mm thickness. Much thicker and it starts to poke
out a bit far for the slipcase.
I don't know how much I trust that ebay item to be exactly 12mm wide at
the base. It looks like a standard 1/2" one, and it's just an bay
listing for a $3 item, so it might be just nominally 12mm not exactly.
Then again it's from the UK not US, so maybe it really is 12mm. Maybe
you can get the seller to actually measure one.
There's some 11.1mm to 12mm on Farnell, but they are mostly 5mm tall. A
bit tall, but also rounded domes so that helps.
Same on DigiKey
https://www.digikey.com/short/4cqpph
There must be some others out there I didn't look any harder. The point
was just to say "search for 12mm".
--
bkw
On 12/29/20 3:37 PM, Scott McDonnell wrote:
The rubber feet adventure:
½” tapered feet are too big. The foot inset measures 15/32 or .47” once
you dig out the original hardened rubber feet. I have not been able to
find any options in this size other than screw in feet varieties.
The 3/8 Rubber pads I bought are nice and will work, but are noticeably
too small. If I could find them in the 15/32 variety, they would be
perfect. Since they are just straight cylinders, you might be able to
squeeze a 1/2 “ version in there. Not satisfied, but it will work for
now. It is still better than what was left of the original pads.
These stands are great. My only issue is that you need to stick one of
them to the battery door. I guess that really isn’t a problem, though. I
like the height and they tilt the M100 just a little bit even when
folded. I like them because they will stay with the computer and I don’t
have to try to keep track of them. Satisfied.
https://www.amazon.com/gp/product/B07ZJ3CYB3
<https://www.amazon.com/gp/product/B07ZJ3CYB3>
I have not received this yet to try out.
https://www.amazon.com/gp/product/B08DM1S3SC
<https://www.amazon.com/gp/product/B08DM1S3SC>
I have a feeling that this is going to interfere with the placement of
the feet and just not work out well without modifying it. But I figured
I can always use it for one of my laptops if it doesn’t work out for the
M100.
Scott M.
*From: *Josh Malone <mailto:[email protected]>
*Sent: *Tuesday, December 29, 2020 10:23 AM
*To: *[email protected] <mailto:[email protected]>
*Subject: *Re: [M100] Replacement rubber feet / Peg Leggs
On Mon, Dec 28, 2020 at 10:39 PM Peter Noeth <[email protected]> wrote:
>
> I am the one who makes Peg Leggs (but only sell by word of mouth).
>
> These are turned from solid delrin and fitted to not cause damage to
the case screw holes of your computer.
>
> They fit the M100, T102, T200 and T600. I currently have a few sets
in stock. They are $10 + $5 shipping (price went up) w/tracking.
>
> Send me a PM with your mailing address and I will send you a PayPal
invoice.
>
> Regards,
Yes! Can *highly* recommend!
--
bkw
