yes the instructions are here: https://bitchin100.com/wiki/index.php?title=REXCPM#Hardware_Installation
On Wed, Jan 20, 2021 at 1:54 PM Hiraghm <[email protected]> wrote: > So I have two M100s. Both were working when last I checked (one of them > I have out to play with, the other I keep in the closet as a backup). > > I decided to get 2 recap kits and 2 batteries for them, as well as a > RexCPM (I have an original Rex in the one I play with). > Since I was going to install a RexCPM in one, I figured now would be a > good time to do the recap. > > Never done a recap before. > > I've replaced a couple batteries with mixed results. One in my Toshiba > T5200 laptop, and one in my Amiga 3K. On the Amiga, I couldn't get the > pins of the old battery entirely out, and so the replacement button > battery doesn't sit low enough. > > I got myself a vacuum soldering iron, because I've had very little luck > with solder braid, and the mechanical vacuum pumps just weren't getting > the job done, imo. Haven't tried it out yet, though. > > I've got the youtube video for recapping my M100, and I plan on watching > it a few times before making the attempt on one of my machines, but I > thought I'd ask here if anyone could/wanted to share their experience / > gotchas at recapping their Model T, first. > > Also, the RexCPM is not like the Rex I have. It has two circuit boards > and some wires and I have no idea how I'm supposed to install it. I > assume Steve's put up instructions on his site, but I haven't had a > chance to look yet. > > >
