Make sure to check the non working one to see if there is anything in the ROM socket, that is the big compartment on the back
On Mon, 22 Feb 2021 at 18:57, Robert J. Hutchins <[email protected]> wrote: > Just gently lever them up with a narrow thin screwdriver from each end. > And don’t worry about the leg length, just gently insert the module until > it stops… > > > > *From:* M100 [mailto:[email protected]] *On Behalf Of > *AvantGuard > Systems > *Sent:* Monday, February 22, 2021 6:09 PM > *To:* [email protected] > *Subject:* [M100] Remove RAM modules > > > > So I've got a "new" working M100, but it only has 1 RAM module in it. My > old non-working is full. I want to remove the ones from the old one, but > when I tried to pull them out, they just don't move. I'm afraid I might > break them. But I'm sure I just need to pull them out, right? > > > > Also I have 1 new module with very long legs. When I tried putting it into > one of the available spaces in the "new" device, it just went in maybe half > the way up the legs. Again, I'm afraid if I push too hard I might break > something. Am I just being paranoid? > > > > I'm looking through Birt and Josh videos, but I don't see where they > removed or inserted these modules. > > > > Curtis >
