You will need python 3 to run it properly.
On Mon, Mar 1, 2021, at 1:09 PM, Peter Vollan wrote: > I think it is 2.7 > > > On Mon, 1 Mar 2021 at 12:53, Kurt McCullum <[email protected]> wrote: >> __ >> Great. Next check, is python3 installed. The DB installer should require it, >> but I wanted to check. >> >> The error would indicate that its the *sys.argv[1:] which is causing the >> error but I'll have to do some more digging as I have not run into this one >> before. >> >> Kurt >> >> On Mon, Mar 1, 2021, at 12:42 PM, Peter Vollan wrote: >>> yes, it is. I used the deb package installer/ >>> >>> >>> On Mon, 1 Mar 2021 at 12:40, Kurt McCullum <[email protected]> wrote: >>>> __ >>>> is the file mcomm.py located in /usr/share/mcomm? The DEB installer will >>>> put it there but if you pulled it down manually then you need to make sure >>>> the paths are correct or tweak the code to look in the folder you placed >>>> the files. >>>> >>>> Kurt >>>> >>>> On Mon, Mar 1, 2021, at 12:16 PM, Peter Vollan wrote: >>>>> Installing and then running mComm on my linux laptop, I got the following >>>>> error message: >>>>> >>>>> File "/usr/bin/mcomm", line 6 >>>>> subprocess.call(["python3", "/usr/share/mcomm/mcomm.py", >>>>> *sys.argv[1:]]) >>>>> ^ >>>>> SyntaxError: can use starred expression only as assignment target >>>> >>
