Doug,
If Brian is not able to send you one, I would be happy to. It might be a bit thick to ship in a padded envelope as normal ‘air mail’ which is supposed to have a 19mm maxim thickness. I have pushed the limits of this in the past to closer to 25mm and the packages went through. The difference in shipping cost is drastic, $6 for ‘air mail’ $16 for first class parcel. Jeff Birt From: M100 <[email protected]> On Behalf Of Doug Jackson Sent: Tuesday, March 16, 2021 5:35 AM To: [email protected] Subject: Re: [M100] molex ic socket Hi Brian, Years ago when I was a trainee, I replaced my Molex socket with a DIP machined pin one so I could use it for a project i was working on- I am sorely regretting that nowadays..... It excludes me from the REX/CPM stull for example. I would have purchased that set of 10, but they don't ship to Australia - so I would have to use my forwarder there at $40 odd.... and that get stupidly expensive. Would you be willing to sell me one and put it in a padded envelope for shipping down under? Kindest regards, Doug Jackson em: [email protected] <mailto:[email protected]> ph: 0414 986878 Check out my awesome clocks at www.dougswordclocks.com <http://www.dougswordclocks.com> Follow my amateur radio adventures at vk1zdj.net <http://vk1zdj.net> On Tue, 16 Mar 2021 at 19:42, Brian K. White <[email protected] <mailto:[email protected]> > wrote: There's some new sockets on ebay https://www.ebay.com/itm/153988317907 I still have a bunch and will give or sell cheap a few to whoever needs a them for repairs & spares, but still, I figured this should be pointed out. Anyone doing repairs should probably go scoop some up. -- bkw
