Hi Bambi, On the back of the 102 keyboard PCB, you can find the switch solder pads for the H key - they are labeled '51' on the silkscreen. Directly underneath it are the pads for that key's diode. (Every key on the matrix has a diode connecting it to the matrix). If you check that diode with a meter in diode test, does it read something like 0.6v ? Or does it read open circuit in both directions?
-Josh On Fri, Sep 16, 2022 at 5:18 PM bambi.page <[email protected]> wrote: > New member here. I have a 102 with a faulty non-working 'H' key. I > tried replacing the flexible contact pad but without any improvement. > I tried searching in the archive but that came up with an error. Does > a member have any advice about repair please? Thank you ~byes~ bambi >
