I hope to use my Gorilla Banana printer with my M100; it's only 7 pin, I
think.
On 12/1/2022 3:03 PM, [email protected] wrote:
Message: 1
Date: Thu, 1 Dec 2022 11:26:44 -0800
From: Gregory McGill <[email protected]>
To: [email protected]
Subject: Re: [M100] Retroprinter settings
Message-ID:
<capgsn8zqu2-9kefuacmqarebyz9nyhci_etwrbanbn6k0rn...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
likely the epson 9pin.. that will handle straight ascii and you can use the
codes for anything else
On Tue, Nov 22, 2022 at 3:17 PM Will Senn <[email protected]> wrote:
Anyone using the Retroprinter? Please share your configuration:
/root/config/emulation
/root/config/epson_pins
Also, which of these sound reasonable for use with my Model 100:
HP Printers
Epson ESC/P 9 pin Printers
Epson ESC/P2 24 Pin / 48 Pin printers
Postscript Printers
IBM ProPrinter Printers
Plain Text Printer
Printronix Printers
I'm thinking Epson ESC/P 9 pin and Plain Text, but given how ignorant I am
of printing with the M10, I figured I'd ask y'all first.
Thanks,
Will
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.bitchin100.com/private.cgi/m100-bitchin100.com/attachments/20221201/afa1d702/attachment-0001.htm>
------------------------------
Subject: Digest Footer
_______________________________________________
M100 mailing list
[email protected]
http://lists.bitchin100.com/listinfo.cgi/m100-bitchin100.com
------------------------------
End of M100 Digest, Vol 144, Issue 1
************************************
