no, the Geoff board uses the Geoff firmware. Model 100 has some impossible-to-replicate escape codes that needs some firmware on the terminal end to deal with.
So, it will sorta work but not entirely, without the firmware I think I have posted. On Sat, Feb 25, 2023 at 6:57 PM Mike Stein <[email protected]> wrote: > While on the topic, can I assume that your updated MVT100 firmware will > work correctly in the original Geaoff Graham board? > > m > > On Sat, Feb 25, 2023 at 3:29 PM Stephen Adolph <[email protected]> > wrote: > >> >> >> http://club100.org/memfiles/index.php?direction=&order=&directory=Steve%20Adolph/MVT100%20for%20PC&; >> >> I decided to post my hacked MVT100 windows application, for feedback. >> >> It works with this driver: >> https://bitchin100.com/wiki/index.php?title=Integrated_VT100_driver >> or REX#/REXCPM R2.1 or newer. >> >> Why: >> Using a serial connection, this modified terminal application gives you >> an 80x24 display using your PC. >> Program is called VT52.exe, which is how it was named by the original >> author. >> Download and extract the executable from the link above, and configure >> the serial interface. Connect your M100/T102 with the VT100 driver >> installed, and connect to PC via serial cable. >> >> Status is "very beta". Feedback is appreciated. >> >> thx >> Steve >> >>
