Off the top of my head, I don't recognize that artwork number: PLX 1010H1X. Am I wrong here?
And, wow, this thing is bodge city. Almost like the Tandy 1400FD that I have. (that I still don't know the story behind the bodges) -Josh On Tue, Oct 24, 2023 at 11:38 AM <[email protected]> wrote: > All, > > > > I recently attended Tandy Assembly 2023 and Eric Dittman asked me to recap > an M100 that had belonged to Frank Durda an engineer at Tandy. I did not > pay much attention to it at the time but when I took it apart last night, I > was not sure what I was looking at. The PCB is a US type but has dozens of > modifications and is a bit different than any other one I have seen. > > I then noticed it was missing the TRS-80 Model 100 badge, the FCC label > and it had no serial number. Now I’m thinking this might be a prototype > machine. I took a few quick pictures, link below. I plan to take some > higher quality images and document the modifications as well as I can. The > goal it to get it working but not alter it more than required. The only > caps that look like they are leaking at the 10uf (which are normally the > worst ones), so I will start with those and the memory battery and see if > it springs to life. > > https://1drv.ms/u/s!AtH4vpaZnzX7mKBV07xl8qlMDuc6QA?e=UfFBVx > > Thoughts? > > Jeff BIrt >
