" I assume the TPPD2 will still work OK on the 102?" Right, that hooks to the RS232 port.
The things that connect to the System Bus port (on the back in the 102, and from the bottom near the OptROM on the M100) are generally memory upgrades/special storage/ other special peripherals (Like Disk/Video Interface). Which it sounds like you don't have, but there are old devices and sometimes hobbyists interface new things to those ports today. -- John. -- John. On Sun, Sep 6, 2026 at 3:39 PM John Watson <[email protected]> wrote: > Thanks Greg. TBH I don't really know much about the System Bus so I > guess my answer to that is "I won't be using it". I assume the TPPD2 > will still work OK on the 102? > > On 06/09/2026 23:35, Greg Swallow wrote: > > The "inconvenient" differce is the system bus. Not many 3rd party > > perriferals survived the change to the T102 and the system bus connector > > moved to the rear side of the case. TRS did mod the DVI kit with a cable > > & software, but any 3rd party stuff that plugged into the system bus, > > i.e. PCSG RAM+ or Chipmunk FDD drive controller, did not make the > > change. If you don't plan on using the system bus, then your choice. > > > > Greg’s <>< > > Sent from my iPhone > > >
