re: MiniNDP for Olivetti M-10 battery life
The Olivetti card only has a CR2016 so that will have less shelf time.
I did a mock-up by just printing a taller cover that would allow a CR2032 holder, and it fits. It's very close to touching the table but doesn't quite. I added the stl for that cover to the repo.
So one could make a card for M-10 that has the full 5-7 years shelf life. Just install the CR2032 holder in place of the CR2016 holder on the same pcb & print the CR2032 version of the cover. No other changes.
But I'm not making it the default. It clears if all 4 feet are good and the surface is flat, but it does stick out as bump and the thin version sticks out less.
-- bkw
