On Fri, 20 Nov 2026 at 08:40, Andrew Ayers <[email protected]> wrote:

> Scott, this sounds great! I (believe) I have a couple of these machines;
> I guess you beat me to one of my back-burner projects! LOL.
>
> Anyhow - suggestions and comments:
>
> 1. CP/M? I'm not sure if this could be possible or not; if it is, then
> maybe someone else will get it working (I'm not expecting this to be a
> part of your project, of course)
>

Needs a different memory map if it's like the other MailStations . Brett
Hallen designed a board to modify it to run CP/M on the base mailstations
but the memory map has the low 16K pinned to the low 16K of flash, so
whilst the other 48K can be RAM (the top 16K if fixed as common RAM) it's
not possible to run CP/M on one without mods.


> 8. re: The parallel port - it would be nice if this could be somehow
> used as a general-purpose IO - assuming it is bidirectional? Or - how
> difficult would it be to bring out the Z80 bus (I've never opened mine,
> likely be easier said than done)?
>

You need 3 output and one input pin at 3.3 or 5v in order to bit bang an SD
card, which is probably sufficient for most purposes. 3v3 will drive the SD
card directly 5v will drive all those dirt cheap "SD for arduino" type
devices. On an 8MHz Z80 bit bang SD is quite usable, especially if you
unroll and optimize the bitbanger.

BASIC shouldn't be hard on such a machine and we now have an actual open
source BASIC option as RTR open sourced the Z80 BBC BASIC (
https://github.com/rtrussell/BBCZ80).

People have tried on and off to make them into anything but the flash is
tricky to reprogram if you screw up and getting stuff onto them is exciting.

Alan

Reply via email to