Great It shows that the response for the m5602 is similar to the m5603. I know enough.
In the next few day I will try to finalize and post a runtime copy in the svn. Willem Sébastien Ducoulombier wrote: >Hi, > > >You wrote: > > >>To see what should be done for m5602 cameras and others I would like to >>ask people to post the output of the following command >> >>cat /proc/bus/usb/devices >> >> > >Here is the part relating to the camera on my Clevo M570A computer : > >T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 >D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 >P: Vendor=0402 ProdID=5602 Rev= 1.00 >S: Product=USB2.0 Camera >C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA >I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=125us >E: Ad=82(I) Atr=03(Int.) MxPS= 0 Ivl=1ms >I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >E: Ad=81(I) Atr=01(Isoc) MxPS=3072 Ivl=125us >E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >E: Ad=81(I) Atr=01(Isoc) MxPS=2688 Ivl=125us >E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >I: If#= 0 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >E: Ad=81(I) Atr=01(Isoc) MxPS=2304 Ivl=125us >E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > >I hope this helps. > >-- >Sébastien > > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
