Hi, Nicolaus Janos Eberhardt wrote: > Hi Erik, hi all, > > just tested latest revision 203 > > Am Mittwoch, den 11.06.2008, 22:06 +0200 schrieb Erik Andrén: >> Could somebody with a m5602-s5k83a based camera (i e an Acer) build >> the >> latest svn and use the dump_sensor=1 option to insmod and post the >> output to me? > > See log attached. I did not get any picture in livecam or Ekiga anymore > with this revision (FPS 0). Also both livecam and Ekiga hanged and I had > to kill them to shut down. >
Thanks. Its possible that the camera stalls after reading the registers and need a power cycling to retain normal functionality. I experienced this on my machine. Let me know if you don't get any picture _without_ performing the dump_sensor / dump_bridge and having done a reset before. Regards, Erik > ATB > Nicolaus > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > > > ------------------------------------------------------------------------ > > _______________________________________________ > M560x-driver-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
