Hi Erik,
It's look seem work fine. once I can install with no error.
It's can create /dev/video0 also. But when I use Cheese for test then I
saw only test screen (Like on TV testing many color, dark blue white red
etc.)
I also found this in desg too,
[ 1613.533376] Linux video capture interface: v2.00
[ 1619.949339] gspca: main v2.3.0 registered
[ 1645.373642] gspca: probing 0402:5602
[ 1645.373657] ALi m5602: Forcing a S5K4AA sensor
[ 1645.474563] gspca: probe ok
[ 1645.474616] usbcore: registered new interface driver ALi m5602
[ 1645.474624] ALi m5602: registered
[ 1937.117094] CE: hpet increasing min_delta_ns to 22500 nsec
[ 2128.881765] gspca: frame alloc failed
Regards
wai
On Sun, 2008-11-02 at 16:51 +0100, Erik Andrén wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Use the m5602-gspca branch.
> Build the modules with the "make" command.
> Load the module dependencies with make load_dep and finally insert
> the module with sudo insmod gspca_m5602.ko force_sensor=3
>
> Regards,
> Erik
>
> Waiwit Jermsirimongkol wrote:
> > Hi Erik
> > thanks for your help. but could u give me a direction to force sensor
> > load parameter , i'm not good at command. I should load whole branch to
> > install or just from s5k4aa ?
> >
> > Thanks & regards
> > wai
> >
> > On Sat, 2008-11-01 at 20:56 +0100, Erik Andrén wrote:
> >> Hi,
> >> I've done a quick analysis and sofar your dump corresponds to the s5k4aa.
> >> If you load the module with the force_sensor parameter to 3 (i.e
> >> force_sensor=3) does it then work?
> >>
> >> Regards,
> >> Erik
> >>
> >> 2008/11/1 Waiwit Jermsirimongkol <[EMAIL PROTECTED]>:
> >>> Dear laurent
> >>> Finally i got it.
> >>> ha ha, but i got next problem about wireless on ubuntu 8.10 instead.
> >>>
> >>> but i will fix it. later. now i think my log would be a correct one.
> >>>
> >>>
> >>> Thanks & regard
> >>> wai
> >>>
> >>> On Fri, 2008-10-17 at 17:32 +0200, Laurent BARRAILLE wrote:
> >>>> Le vendredi 17 octobre 2008 à 15:59 +0200, Erik Andrén a écrit :
> >>>>> 2008/10/17 Waiwit Jermsirimongkol <[EMAIL PROTECTED]>:
> >>>>>> Hi Erik , Laurent
> >>>>>>
> >>>>>>
> >>>>>> I send u a log for init, start ,stop usb device.
> >>>>>>
> >>>>> Hi,
> >>>>> I've received the logs, unfortunately they seem to bogus to me.
> >>>>> I can't spot any communication between the usb bridge and the sensor.
> >>>>> Also, all data sent is strictly zero.
> >>>> Hi,
> >>>>
> >>>>
> >>>> I can confirm, i see only bridge in his log.
> >>>>
> >>>>
> >>>>> In order to help you I'm going to need "valid" snoops conducted in
> >>>>> windows.
> >>>>>
> >>>>> Laurent, could you please check if you're able to spot any i2c
> >>>>> communication in the logs you captured under Virtualbox?
> >>>> But for me, it's ok, my log are good (init and start) on virtualbox
> >>>> I attached the result made with this command :
> >>>>
> >>>> awk '/^ 000000.0..[1|2]3....81/ { print $0 }'
> >>>>
> >>>>
> >>>> Waitwit,
> >>>>
> >>>> Did you add this line in your fstab ?
> >>>>
> >>>> none /proc/bus/usb usbfs devgid=1000,devmode=664 0 0
> >>>>
> >>>>
> >>>> Regards
> >>>>
> >>>> Laurent
> >>>>
> >>>>> Thanks,
> >>>>> Erik
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Regards & cheer up !
> >>>>>> Wai
> >>>>>> On Fri, 2008-10-17 at 09:49 +0200, Erik Andrén wrote:
> >>>>>>> 2008/10/17 Laurent BARRAILLE <[EMAIL PROTECTED]>:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> I managed to get usbsnoop log of the init sequence.
> >>>>>>>> The result is the same as a real Windows.
> >>>>>>>> But I can't get any image, i don't know why.
> >>>>>>>>
> >>>>>>>> I'll try to get other log ( start, exposure ...)
> >>>>>>>>
> >>>>>>>> Regards
> >>>>>>>>
> >>>>>>>> Laurent
> >>>>>>>>
> >>>>>>> Yesterday I tried launching skype inside a virtualbox using win2k
> >>>>>>> using a quickcam web webcam. The result was that the virtualbox window
> >>>>>>> resized itself to a small resolution (640x480-ish) and reverted to use
> >>>>>>> 8 bit color depth.
> >>>>>>>
> >>>>>>> Maybe this is windows 2000 specific.
> >>>>>>>
> >>>>>>> Regards,
> >>>>>>> Erik
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Le jeudi 16 octobre 2008 à 14:59 +0200, Erik Andrén a écrit :
> >>>>>>>>> Laurent,
> >>>>>>>>> did you manage to produce any usbsnoop logs in virtualbox?
> >>>>>>>>>
> >>>>>>>>> 2008/10/16 Laurent BARRAILLE <[EMAIL PROTECTED]>:
> >>>>>>>>>> Hi,
> >>>>>>>>>>
> >>>>>>>>>> I tried on my computer.
> >>>>>>>>>> I can install Webcam but i have a black screen.
> >>>>>>>>>> I think the webcam works, it's only a display problem with
> >>>>>>>>>> virtualbox.
> >>>>>>>>>> The usbsnoop works certainly even if you see nothing.
> >>>>>>>>>> Try to get usbsnoop log and send to Erik.
> >>>>>>>>>>
> >>>>>>>>>> Regards
> >>>>>>>>>>
> >>>>>>>>>> Laurent
> >>>>>>>>>>
> >>>>>>>>>> Le mercredi 15 octobre 2008 à 16:26 +0700, Waiwit Jermsirimongkol a
> >>>>>>>>>> écrit :
> >>>>>>>>>>> Yes, I done it all. If VB2 direct connect to USB hardware, It's
> >>>>>>>>>>> should
> >>>>>>>>>>> work at all.
> >>>>>>>>>>>
> >>>>>>>>>>> I will check it again.
> >>>>>>>>>>>
> >>>>>>>>>>> :P
> >>>>>>>>>>> wai
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On Wed, 2008-10-15 at 11:05 +0200, Laurent BARRAILLE wrote:
> >>>>>>>>>>>> If you can use USB flash drive, i suppose you have already made
> >>>>>>>>>>>> all this
> >>>>>>>>>>>> following settings :
> >>>>>>>>>>>>
> >>>>>>>>>>>> Modify /etc/init.d/mountdevsubfs.sh
> >>>>>>>>>>>> Uncomment the 4 lines around line 40 after "Magic to make
> >>>>>>>>>>>> /proc/bus/usb
> >>>>>>>>>>>> work"
> >>>>>>>>>>>>
> >>>>>>>>>>>> Add this line in fstab :
> >>>>>>>>>>>> none /proc/bus/usb usbfs devgid=1000,devmode=664 0 0
> >>>>>>>>>>>>
> >>>>>>>>>>>> Verify you are in vboxusers group.
> >>>>>>>>>>>> Configure usb in virtualbox
> >>>>>>>>>>>> Install add-ons clients for vbox in your virtual XP system.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am not on my computer with my Ali Cam so i'm not sure that
> >>>>>>>>>>>> works with
> >>>>>>>>>>>> it.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>>
> >>>>>>>>>>>> Laurent
> >>>>>>>>>>>>
> >>>>>>>>>>>> Le mercredi 15 octobre 2008 à 15:44 +0700, Waiwit
> >>>>>>>>>>>> Jermsirimongkol a
> >>>>>>>>>>>> écrit :
> >>>>>>>>>>>>> Hi Laurent,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> In Virtualbox(2.x) I can use USB in Hardy , such as USB flash
> >>>>>>>>>>>>> drive , or
> >>>>>>>>>>>>> mass storage too.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> It's also detecting my Build in webcam as USB camera too (of
> >>>>>>>>>>>>> course I
> >>>>>>>>>>>>> already installed driver).
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> hmm, But when open camera it's didn't get data from webcam
> >>>>>>>>>>>>> video is
> >>>>>>>>>>>>> empty.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> If it's have to setting more option please tell me. :)
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Regards.
> >>>>>>>>>>>>> wai
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On Wed, 2008-10-15 at 10:16 +0200, Laurent BARRAILLE wrote:
> >>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Le mercredi 15 octobre 2008 à 10:21 +0700, Waiwit
> >>>>>>>>>>>>>> Jermsirimongkol a
> >>>>>>>>>>>>>> écrit :
> >>>>>>>>>>>>>>> Hi
> >>>>>>>>>>>>>>> I look in to window xp driver (inf file). There 's a sensor
> >>>>>>>>>>>>>>> type in
> >>>>>>>>>>>>>>> comment. he he
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> (I forgot the site ready, someone post in the ubuntu forum)
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> T T, I can't find dump message..May be have to switch back to
> >>>>>>>>>>>>>>> M$ for a
> >>>>>>>>>>>>>>> while. I try on Virtual box it's not work. ha ha ha
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> The last version of virtualbox (2.0) seems to be able to
> >>>>>>>>>>>>>> connect
> >>>>>>>>>>>>>> directly with usb device.
> >>>>>>>>>>>>>> I installed it on my Ubuntu Hardy, i'm testing, it should
> >>>>>>>>>>>>>> some settings
> >>>>>>>>>>>>>> to activate this feature.
> >>>>>>>>>>>>>> If i succeed i'll give you the tips.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Regards
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Laurent
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Thanks
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> On Tue, 2008-10-14 at 19:06 -0700, Jonee Ryan Ty wrote:
> >>>>>>>>>>>>>>>> May I ask how you found out that your sensor is MT9001C12ST?
> >>>>>>>>>>>>>>>> Thanks!
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> --- On Tue, 10/14/08, Waiwit Jermsirimongkol <[EMAIL
> >>>>>>>>>>>>>>>> PROTECTED]> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> From: Waiwit Jermsirimongkol <[EMAIL PROTECTED]>
> >>>>>>>>>>>>>>>>> Subject: Re: [M560x-driver-devel] another censor ...
> >>>>>>>>>>>>>>>>> MT9001C12ST.
> >>>>>>>>>>>>>>>>> To: "Erik Andrén" <[EMAIL PROTECTED]>
> >>>>>>>>>>>>>>>>> Cc: [email protected]
> >>>>>>>>>>>>>>>>> Date: Tuesday, 14 October, 2008, 12:47 PM
> >>>>>>>>>>>>>>>>> Yes, I got that message.
> >>>>>>>>>>>>>>>>> So i find more information about this.
> >>>>>>>>>>>>>>>>> Someone suggest to look in window driver to find what the
> >>>>>>>>>>>>>>>>> exactly censor
> >>>>>>>>>>>>>>>>> type. then I got this one MT9001C12ST. for my webcam 1.3M;
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> So I look back in SVN for all branch there 's no my
> >>>>>>>>>>>>>>>>> model inside.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> T T.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> On Tue, 2008-10-14 at 06:37 +0200, Erik Andrén wrote:
> >
> >
> > Waiwit Jermsirimongkol wrote:
> >>>>>>>>>>>>>>>>>>>> Hi Erik ,
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> My is build in webcam come up with BenqQ s31 call
> >>>>>>>>>>>>>>>>>> (Qeye),
> >>>>>>>>>>>>>>>>>>>> $> lsusb
> >>>>>>>>>>>>>>>>>>>> $> Bus 005 Device 002: ID 0402:5602 ALi Corp.
> >>>>>>>>>>>>>>>>>> Video Camera Controller
> > Ok,
> > What about do you get when you modprobe the m5602
> >>>>>>>>>>>>>>>>>> module?
> > That no known sensor is detected?
> >
> > Regards,
> > Erik
> >
> >>>>>>>>>>>>>>>>>>>> regards
> >>>>>>>>>>>>>>>>>>>> wai
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> On Mon, 2008-10-13 at 19:31 +0200, Erik Andrén
> >>>>>>>>>>>>>>>>>> wrote:
> >>>>>>>>>>>>>>>>>>>> What camera do you have?
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>>>>>>>>> Erik
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> Waiwit Jermsirimongkol wrote:
> >>>>>>>>>>>>>>>>>>>>>>> I totaly use ubuntu now, but
> >>>>>>>>>>>>>>>>>> one problem remain is about webcam.
> >>>>>>>>>>>>>>>>>>>>>>> It's use MT9001C12ST. I
> >>>>>>>>>>>>>>>>>> try use similar one like mt9v111 It's
> >>>>>>>>>>>>>>>>>>>>>>> didn't
> >>>>>>>>>>>>>>>>>>>>>>> work. got debug event a lot.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Hope u can help
> >>>>>>>>>>>>>>>>>>>>>>> waiting for perfect ubuntu.
> >>>>>>>>>>>>>>>>>>>>>>> Thanks
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> -------------------------------------------------------------------------
> >>>>>>>>>>>>>>>>>>>>>>> This SF.Net email is sponsored by the
> >>>>>>>>>>>>>>>>>> Moblin Your Move Developer's challenge
> >>>>>>>>>>>>>>>>>>>>>>> Build the coolest Linux based
> >>>>>>>>>>>>>>>>>> applications with Moblin SDK & win great prizes
> >>>>>>>>>>>>>>>>>>>>>>> Grand prize is a trip for two to an
> >>>>>>>>>>>>>>>>>> Open Source event anywhere in the world
> >>>>>>>>>>>>>>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> >>>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>>>>>>>> M560x-driver-devel mailing list
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> [email protected]
> >>>>>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> -------------------------------------------------------------------------
> >>>>>>>>>>>>>>>>> This SF.Net email is sponsored by the Moblin Your Move
> >>>>>>>>>>>>>>>>> Developer's challenge
> >>>>>>>>>>>>>>>>> Build the coolest Linux based applications with Moblin SDK
> >>>>>>>>>>>>>>>>> & win great prizes
> >>>>>>>>>>>>>>>>> Grand prize is a trip for two to an Open Source event
> >>>>>>>>>>>>>>>>> anywhere in the world
> >>>>>>>>>>>>>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> >>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>> M560x-driver-devel mailing list
> >>>>>>>>>>>>>>>>> [email protected]
> >>>>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Yahoo! Toolbar is now powered with Search
> >>>>>>>>>>>>>>>> Assist.Download it now!
> >>>>>>>>>>>>>>>> http://ph.toolbar.yahoo.com/
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> -------------------------------------------------------------------------
> >>>>>>>>>>>>>>> This SF.Net email is sponsored by the Moblin Your Move
> >>>>>>>>>>>>>>> Developer's challenge
> >>>>>>>>>>>>>>> Build the coolest Linux based applications with Moblin SDK &
> >>>>>>>>>>>>>>> win great prizes
> >>>>>>>>>>>>>>> Grand prize is a trip for two to an Open Source event
> >>>>>>>>>>>>>>> anywhere in the world
> >>>>>>>>>>>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> >>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>> M560x-driver-devel mailing list
> >>>>>>>>>>>>>>> [email protected]
> >>>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
> >>>>>>>>>>
> >>>>>>>>>> -------------------------------------------------------------------------
> >>>>>>>>>> This SF.Net email is sponsored by the Moblin Your Move Developer's
> >>>>>>>>>> challenge
> >>>>>>>>>> Build the coolest Linux based applications with Moblin SDK & win
> >>>>>>>>>> great prizes
> >>>>>>>>>> Grand prize is a trip for two to an Open Source event anywhere in
> >>>>>>>>>> the world
> >>>>>>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> M560x-driver-devel mailing list
> >>>>>>>>>> [email protected]
> >>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
> >>>>>>>>>>
> >>>>>>>>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
>
> iEYEARECAAYFAkkNzHIACgkQN7qBt+4UG0GDlQCgi4Ggb8VpPeY6JUxVbCpsWreM
> GFsAniz9NYtkTfd1uQBvFVavPwseU5kq
> =kxP9
> -----END PGP SIGNATURE-----
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
M560x-driver-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
