-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
David Campbell wrote: > Erik, > > Below you mention hg tree, and then there's svn. I'm confused - which > source repository should be used, and which branch, for m5603x bridge > with ov7648 sensor. > > -- Dave Sorry I was a bit unclear. The message was aimed at Laurent Barraille who has a machine with a m5602 bridge and the po1030 sensor. I just added the m560x-driver-devel as a cc in order to log the conversation. If you have a m5602 bridge then you should follow the instruction available at http://m560x-driver.wiki.sourceforge.net/testing_m5602 If you have a m5603 bridge then you have to use one of the svn branches. Which one that gives the best result I don't know as I don't have the proper hardware. I hope this clears things out a bit. Regards, Erik > > Erik Andrén wrote: >> Hi, >> >> When you have the time please give the latest hg tree a spin. I >> added some untested support for QVGA resolution. >> Could you please test it and see if it gaves any sane image. >> A good program to use is relative modenrn version of cheese which >> supports multiple resolutions. >> >> Best regards, >> Erik >> >> > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAklvpzsACgkQN7qBt+4UG0H0pwCgoJiOSoLyNjCj3NNF0f4JRKcn ygMAn18zjTDfll3D2Z0yGw7GeI9Bcma7 =i7mo -----END PGP SIGNATURE----- ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
