Thanks everyone for the suggestions - I'm having mixed success setting up the airport express. My LAN is a bit complex - BB cable into an ntl ethernet modem which feeds a 4-port linksys router - the router links to an ethernet printer, an old mac, an airport extreme (set up as a wireless switch) and a netgear 4 port hub. The hub links to a couple of other old macs around the building. On the spare WAN of the Airport extreme I've hooked up another mac, and I generally connect a Powerbook 400 to the airport using its internal 811b card. All the macs/printers are networked via appletalk and can connect to the internet.

I can either get a good signal connecting my powerbook to the airport express set up as a separate base station - but then can't link up to the airport extreme, internet, LAN etc. Alternatively, I can set it up to connect to the existing network, but then suffer from dropout and cannot use the ethernet port on the express to 'see' the rest of the network (for yet another computer), as I had hoped.

There are so many options in the admin utility, I'm sure it is possible to do what I want to do, but it isn't easy! In particular, knowing which MAC addresses to use and DHCP options is a bit of a nightmare.

DaveW


-- Mac UK is sponsored by <http://lowendmac.com/> and...

123Inkjets.com <http://lowendmac.com/ad/123inkjets.html>

     Support Low End Mac <http://lowendmac.com/lists/support.html>

Mac UK list info:       <http://lowendmac.com/lists/mac-uk.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/mac-uk%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com



Reply via email to