When you tried to compile glib, how did you configure it?
On Nov 20, 3:21 pm, stupakov <[EMAIL PROTECTED]> wrote:
> Amit,
>
> Thanks for your quick response and your excellent advice.
> I got the developer version of MacFuse and ended up using the sshfs
> binary in there, which works.
>
> But this was after I tried compiling sshfs in the release version of
> MacFUSE and ran into some problems:
> installed pkg-config
> installed gettext
> installing glib -
> make: gconvert.c:55:2: error: #error GNU libiconv not in use but
> included iconv.h is from libiconv
> gconvert.c:55:2: error: #error GNU libiconv not in use but included
> iconv.h is from libiconv
> gconvert.c:55:2: error: #error GNU libiconv not in use but included
> iconv.h is from libiconv
> lipo: can't figure out the architecture type of: /var/folders/qF/
> qF2TzT7XFimoAKxranQdv++++TI/-Tmp-//cctz0gIe.out
> make[4]: *** [gconvert.lo] Error 1
> make[3]: *** [all-recursive] Error 1
> make[2]: *** [all] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> At this point I tried all the different options for "--with-
> libiconv=" when running ./configure for glib, but none worked.
> Anyone who runs into the same problem may find this
> helpful:http://www.linuxforums.org/forum/linux-applications/61260-problems-in...
> Rather than spending more time on reinstalling libiconv, I got the
> developer version of MacFuse and used the precompiled binary.
>
> -Alex
>
> On Nov 19, 8:58 pm, Amit Singh <[EMAIL PROTECTED]> wrote:
>
> > The MacFUSE code base is in a state of flux right now. Trying to
> > compile MacFUSE itself right now can be painful.
>
> > You can do one of two easy things.
>
> > Install the prerelease ("Developer") version of MacFUSE.
> > Seehttp://code.google.com/p/macfuse/wiki/AUTOINSTALLonhow to do it.
> > Then the sshfs binaries in the svn tree will work.
>
> > Alternatively, use an older sshfs binary found within the .app
> > inhttp://macfuse.googlecode.com/files/sshfs-1.0.0.dmg
>
> > You can compile just sshfs yourself
> > too.http://code.google.com/p/macfuse/wiki/HOWTO
> > describes how to compile it. Although it may sound daunting to some,
> > it's simply mechanical--there are no gotchas or caveats.
>
> > Amit
>
> > On Nov 19, 8:00 pm, stupakov <[EMAIL PROTECTED]> wrote:
>
> > > Hi all,
>
> > > I'm trying to Install MacFuse on my 10.5 system in order to get sshfs
> > > working.
> > > Here's what I've done, and the problems I'm seeing:
>
> > > 1) installed the MacFuse package from the .dmg file found
> > > here:http://code.google.com/p/macfuse/downloads/list
> > > 2) Restarted my machine as recommended.
> > > 3) downloaded the MacFuse source, and ran sshfs-static-leopard
> > > This complained:
>
> > > [CODE]
> > > ~/Tools/MacFUSE/macfuse # ./filesystems/sshfs/binary/sshfs-static-
> > > leopard
> > > dyld: Library not loaded: /usr/local/lib/libfuse.2.dylib
> > > Referenced from: /Users/stupakov/Tools/MacFUSE/macfuse/./filesystems/
> > > sshfs/binary/sshfs-static-leopard
> > > Reason: image not found
> > > Trace/BPT trap
> > > [/CODE]
>
> > > [CODE]~/Tools/MacFUSE/macfuse # ls /usr/local/lib/libfuse.*
> > > libfuse.0.0.0.dylib libfuse.0.dylib libfuse.a
> > > libfuse.dylib libfuse.la [/CODE]
>
> > > It looks like package did not install the libfuse.2.dylib library
> > > necessary for sshfs to run.
>
> > > 4) I decided to compile MacFuse as described
> > > here:http://code.google.com/p/macfuse/wiki/HOWTO
> > > but got these errors.
>
> > > [CODE]mac[545] ~/Tools/MacFUSE/macfuse/core # ./macfuse_buildtool.sh -
> > > t smalldist
> > > MacFUSEBuildTool(preflight) : Xcode version 3.1.1 found (minimum
> > > requirement is 3.1.1)
> > > MacFUSEBuildTool(smalldist) : initiating Universal build for 10.5
> > > MacFUSEBuildTool(smalldist) : building MacFUSE kernel extension and
> > > tools
> > > === BUILDING NATIVE TARGET fusefs OF PROJECT fusefs WITH CONFIGURATION
> > > Release ===
>
> > > Checking Dependencies...
> > > error: There is no SDK with specified name or path 'Unknown Path'
> > > ** BUILD FAILED **
> > > MacFUSEBuildTool(smalldist) failed: xcodebuild cannot build
> > > configuration Release.
> > > [/CODE]
>
> > > Any suggestions for what to try next would be appreciated.
> > > Thanks
> > > Alex
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"MacFUSE" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/macfuse?hl=en
-~----------~----~----~----~------~----~------~--~---
