Basically I just wanted it for file sharing from my work to my home. and maybe remote desktop. I don't know much about ssh, and haven't heard of ssh tunneling. It sounds like that may do the trick for me. I wanted my home computers (2 XP machines and an OS X) to show up in the network browser to bring in files if they're needed. I carry my iBook with me but cant have everything all the time. IP wouldn't be too much of a concern I've had the same address for close to a year now. I'm aware of the speed variations. But it that's not a big deal either.
Thanks Thanks to everyone who replied. Brian O'Neal On Aug 16, 2004, at 5:29 PM, Lee Larson wrote: > On Aug 16, 2004, at 12:21 PM, Brian wrote: > >> Does anyone know of a consumer grade(Cheap!) router that will allow >> me to make a vpn connection to my home from other locations? > > There's a linux project to do this called FreeS/WAN. If you can round > up an old 486 machine, all the software is then free. Check out > www.freeswan.org and > www.jacco2.dds.nl/networking/freeswan-panther.html. > >> It seems that most everything that has "VPN Pass Through" is for >> outbound connections. Meaning from my home to my office. I want the >> reverse of this, from my office to my home. >> Is anyone successfully getting from their office to their home >> networks with vpn? What is your set up, if so? >> >> I have read, very little, about SSH. Is this similar to VPN? And if >> I understand correctly it is accomplished through the Terminal, >> correct? > > There are two different encryption standards here: IPSEC and SSH. > IPSEC is the one that's usually used for VPN, and SSH can really be > used for just about anything. > > You talk of setting up a VPN, but you don't say what services you want > to transfer between the networks. I don't have a VPN between my office > and home, but I can still do file sharing, printing and other services > securely in both directions via SSH tunneling. All the software you > need to do so is already there with Mac OS X. > > There are at least two annoyances with doing this over a cable > connection. > > First, the connection is not symmetrical; the downstream speed is LOTS > faster than the upstream speed. Depending on what you want to do, this > can get really bothersome. > > More minor is the fact that the IP address on the cable end is not > fixed. It doesn't change very often, but you can get around even that > by using a DynDNS service (www.dyndns.org is free) and suitable > software to readjust the DNS entry whenever the IP address changes. > Some of the cable/DSL routers (e.g., NetGear) even have the DynDNS > software built in. I use software on my Linux machine to keep the DNS > name up to date. The www.dyndns.org Web site has a list of software, > several of which work on Mac OS X. This way lml.homedns.org always > points to my house, no matter what games Insight plays with the IP > address. > > The last time the IP number changed was when the power went out for > four days a few weeks ago. This exceeded the lease time on the DHCP, > so a new IP was allocated when the power came on. I didn't even notice > that the number changed until a couple of days ago because the DynDNS > took care of addressing everything. > > > > > | The next meeting of the Louisville Computer Society will > | be August 24. The LCS Web page is <http://www.kymac.org>. > | List posting address: <mailto:macgroup at erdos.math.louisville.edu> > | List Web page: <http://erdos.math.louisville.edu/macgroup> > | The next meeting of the Louisville Computer Society will | be August 24. The LCS Web page is <http://www.kymac.org>. | List posting address: <mailto:macgroup at erdos.math.louisville.edu> | List Web page: <http://erdos.math.louisville.edu/macgroup>
