Hi Fran, First, make sure as HP suggested that you've updated to 9.2.1 or later. You mentioned 9.2 which implies you need an additional update.
Second, I would not ever plug a printer into the keyboard port but have it plugged in directly to your Mac. I'm not implying that it won't work. I just never seen it done. Assuming that you are using the recommended printer drivers, should you continue to have problems you may want to run a diagnostic check with something like Norton's Disk Doctor, Disk Warrior or Disk First Aid. Directory corruption or damaged system files could also be responsible for your problems. Good Luck! Ward Oldham, MacDude MacTown 1041 Bardstown Road Louisville, KY 40204 502-485-1243 ward at mactown.us http://www.mactown.us > Recently my HP deskjet began malfunctioning; it would begin to print > and then stop, giving an error msg. that possibly the cover was open, > the connection was broken, etc. -- unlikely possibilities. HP said: > "There are known issues such as you are seeing with partial or no > printing when using this printer with Mac OS 9.1. To resolve this, > upgrade the Mac OS to 9.2.1 or later. The updates are available for > download from Apple's website. A workaround which often helps is to plug > the USB cable from the printer into a keyboard port instead of the Mac > itself if the port is available." > I updated to 9.2, and the USB was already plugged into the keyboard. > The same problem exists, but somewhat erratically. I was able to print > out 3/4 of a page one time, then the printer reverted to printing out > only a line or 2 on subsequent printings. > Do any of you have some suggestions? I appreciate your time and help > very much. > > Fran > > > | The next meeting of the Louisville Computer Society will > | be March 25. The LCS Web page is <http://www.kymac.org>. | The next meeting of the Louisville Computer Society will | be March 25. The LCS Web page is <http://www.kymac.org>.
