Hi Everyone, I'm struggling with the QtQuickVCP framework a little with Cetus, most likely my newbness to the remote system. I have a few questions that a nudge in the right direction would be greatly appreciated. Here we go:
1) Where is the configuration info populated from for machine speed limits etc? For instance, the min and max linear speed set in the linuxcnc ini file [DISPLAY] section does not seem to affect the jog slider limits in the Cetus gui. 2) Preview window segfaults - just me? Many of my files work fine with the previewer and then there are a few that will generate a segfault as soon as you click the preview tab label, even when the "Enable preview" is not checked. I am happy to look into debugging this once I finish downloading the qt sdk, I was just curious if this was a common problem or if I'm being exceptionally difficult on it. 3) I have Cetus sitting on the remote device right now, and then it deploys to the pc. Can I keep the cetus files locally on the pc and connect to the remote haltalk service? I tried putting the Cetus files in different places on my local machine, e.g., the qml folder on the ld path, etc., but I couldn't get it to appear in the gui selector under the local tab. 4) To further 3, can I automatically have Cetus load without selecting a service provider/gui? I thought I saw an example of how to do this on this list but my google-fu must be lacking. Thanks in advance, Devin -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
