Hi, Andrij,
did you run the run script or did you run mklauncher?
If you want to use mklauncher do you have launcher.ini, is it correct?
Try to start mklauncher from config dir where launcher.ini is like this:
cd ~/machinekit/configs/my-config
mklauncher .
Is the path correct in run.py line:
launcher.start_process("configserver -n MendelMax ~/Machineface")
?
Don't you get any error messages when you start ./run.py ?
01/04/2017 01:34 AM, Andrij Senyk rašė:
Hello,
I tried to configure remote access to BBB Machinekit according to this
https://github.com/machinekoder/QtQuickVcp#qt5_uis_with_machinekitsdk
I set REMOTE to 1 in /etc/linuxcnc/machinekit.ini
and change display options
DISPLAY = mkwrapper
INTRO_GRAPHIC =
INTRO_TIME = 0
and add in hal file
loadusr -W haltalk
create run-script
I try to connect from mac os, windows and android but client cannot find
any instances in unicast/multicast mode (of course I add an ip address
in unicast mode)
also I try this
https://github.com/machinekoder/MendelMax-CRAMPS
but effect are the same
Where I did a mistake?
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
