On 02/01/2017 07:02 AM, Kirk Wallace wrote:
... snip
I seem to recall that the scope traces that got above 3Volts worked.
Such as the motherboard port set to EPP worked:
http://wallacecompany.com/machine_shop/G540/g540_mb_epp.jpg
But set to SPP didn't:
http://wallacecompany.com/machine_shop/G540/g540_mb_epp.jpg
... snip
Oops, bad link above, this should be better:
http://wallacecompany.com/machine_shop/G540/g540_mb_spp.jpg
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
