Hi Josh, I am having the same problem and I am using the same hardware. Have you had any luck getting this to work? I created a new post this morning asking for help.
On Friday, June 17, 2016 at 9:13:48 PM UTC-4, Josh Martin wrote: > > I have found this to be an epic struggle here. On LInuxCNC I got the test > to work where I could press a button and get an output on the terminal. > But in the end it didn't work, and so I opted to use my beaglebone black > with the Xylotex cape as a test bed to see if I can get it all to work. > Needless to stay after several hours I can't get it to work, I've tried > both layouts for the unit in the SIM configs, tried editing the INI, and so > forth. > The error I get is attached... I'm rather desperate here, as firstly I > like how small the Beaglebone black is compared to x86 solutions, and > secondarily the XHC-HB04 is working but for some odd reason not for > myself. I suppose another question is the Debian Distro more feature > packed? Also, for the G540 is there a INI for it or do I need to redo the > HAL setup for it all? > > Thanks for everything and if I get this working I'll try to share my setup. > Sincerely > Joshua Martin > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
