On Thursday, May 11, 2017 at 2:40:36 PM UTC+2, Alexander Rössler wrote: > > Make sure your Tab is active: true >
I've added that, but it doesn't fix the problem. referring to the thread Marius linked to, do I need to change the "servicewindow" (whatever that is)? could you enlighten me a bit? Because I obviously have no clue about what's going on with QtQuick. > Bas de Bruijn writes: > > > Hi, > > > > I've been building single QtQuickVCP window UI's in the past, and today > I > > try to build some tabs into my UI. > > I'd like to have a tab with buttons, and a tab with IO's for inspecting > HAL > > pins. So for this I looked into Machineface and I moved my buttons and > hal > > pins to a different file. > > Frankly I've mostly extended upon examples, and what happpened was > simple > > to follow but in Machineface I can't seem to find out what's happening > when. > > > > I have come up with the following setup: > > 3 files: > > - UI.qml (this is the main app) > > - Buttons_tab.qml (now holding what was previously in UI) > > - Io_tab.qml > > > > in UI.qml I've added: > > ``` > > TabView { > > id: mainTab > > frameVisible: false > > anchors.left: toolBar.right > > anchors.right: displayPanel.left > > anchors.top: parent.top > > anchors.bottom: parent.bottom > > anchors.rightMargin: Screen.pixelDensity > > anchors.leftMargin: Screen.pixelDensity > > > > Buttons_tab { } > > Io_tab { } > > } > > ``` > > > > When running machinekit-client I get the message in the window after > > connecting: > > > > ``` > > No error > > pin count mismatch:pb comp=1 hal comp=24 > > ``` > > > > I probably missed something trivial. > > Any thoughts or pointers to understanding what I do wrong? > > > > Cheers, > > Bas > > > -- > Alexander > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.