I'm trying to get sserial running on my DE0 Nano Soc. As starting point I changed the 5i25-socfpga.ini from the hm2-soc-stepper examples:
CONFIG="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo sserial_port_0=00000000 num_stepgens=4 num_encoders=1" The 7i76 config has the sserial tx 0 pin on gpio10. When connecting a logic analyzer I expect to the 2,5mbaud probe signal. But there is no probing signal. When using halmeter I can see the state of hm2_de0n.0.gpio.010.in. It is true. There is a high ohm pull up in the line. After connecting the signal to GND the signal is false. I think that the sserial is not activated for this port. Are there any example configurations for machinekit with sserial? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
