Ok I have made progress. make ran to completion but there were some
warning from the hal component.
I am not sure if this is a problem or not. I am pasting a sample below.
hal/drivers/mesa-hostmot2/pktuart.c: In function ‘hm2_pktuart_setup’:
hal/drivers/mesa-hostmot2/pktuart.c:233:27: warning: suggest parentheses
around comparison in operand of ‘&’ [-Wparentheses]
if ( (buff >> 22) & 0xff == 0x0) {
^
In file included from hal/drivers/mesa-hostmot2/pktuart.c:26:0:
hal/drivers/mesa-hostmot2/pktuart.c: In function ‘hm2_pktuart_read’:
hal/drivers/mesa-hostmot2/hostmot2.h:50:21: warning: format ‘%s’ expects a
matching ‘char *’ argument [-Wformat=]
#define HM2_NAME "hm2"
^
hal/drivers/mesa-hostmot2/hostmot2.h:67:66: note: in expansion of macro
‘HM2_NAME’
#define HM2_ERR(fmt, args...) rtapi_print_msg(RTAPI_MSG_ERR, HM2_NAME
"/%s: " fmt, hm2->llio->name, ## args)
^~~~~~~~
hal/drivers/mesa-hostmot2/pktuart.c:403:9: note: in expansion of macro
‘HM2_ERR’
HM2_ERR("%s read: hm2->llio->write failure %s\n", name);
^~~~~~~
What do you think are these problems?
Thanks med
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
