Here is what I am getting from trying to boot the uSD I built. Is it possible that I have a bad uSD?
U-Boot SPL 2017.05 (Aug 20 2017 - 08:57:37) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete Trying to boot from MMC1 U-Boot 2017.05 (Aug 20 2017 - 08:57:37 -0700) CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC Internal Transceiver (3.0V) Watchdog enabled I2C: ready DRAM: 1 GiB MMC: dwmmc0@ff704000: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Terasic DE10-Nano Net: Error: ethernet@ff702000 address not set. No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Unknown command 'part' - try 'help' Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** a -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.