> On 2 Oct 2017, at 08:56, Mario Scholz > <ma...@expires-2017.mail.trial-n-error.net> wrote: > > Hi, > > Thanks for your response. > > I think there is a misunderstanding. I would like to use Terasic DE10: > http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=1046
I think this thread may interest you. https://groups.google.com/forum/m/#!topic/machinekit/fleGyyOwDgE > > together with the db25 interface board from Charles Steinkühler: > https://oshpark.com/shared_projects/ZSjsiCUd > > In order to use HDMI and db25 interface board I need to reprogram the FPGA > and generate a bitstream+device tree to support both. The DE0 bitstream files > will not work as it didn't included an HDMI section supported by the DE10. Do > you agree? > > Nevertheless I loop mounted the image you referred to and found only DE0 > (predecessor of DE10) bitstream biles and dtbs > e.g. > lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.rbf > lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.rbf > lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I77_7I76_GPIO_GPIO.rbf > > Best regards, > Mario > >> On 2017-10-02 08:13, schoone...@btinternet.com wrote: >> You don't need to make your own. >> There is an image pre-built here >> http://deb.machinekit.io/uploads/de0-nano/debian-8.5-console-armhf-2017-02-14/ -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.