If someone wants to help with combining the newer pythonic machinetalk configs with tripodkins, I'll give you equal billing on the hackaday page... :) The OpenSCAD source is there for the hardware with all the tolerances tweaked already, so you can print your own.
On Saturday, October 7, 2017 at 11:55:15 AM UTC-4, Daren Schwenke wrote: > > > > On Saturday, October 7, 2017 at 8:16:49 AM UTC-4, Bas de Bruijn wrote: >> >> >> >> On 6 Oct 2017, at 23:10, Daren Schwenke <[email protected]> wrote: >> >> Built this with the intent of running Machinekit/tripodkins with it. >> Have not worked on the config yet, but the hardware looks like it will >> work now, so soon. >> >> https://hackaday.io/project/26938-arcus-3d-c1-cable-printer >> >> https://youtu.be/KQ19fT4BQQU >> >> I use a compression spring on the rod pushing on the mounting point for > the three. > >> That's nice to see! You use a spring to keep tension on the threads? >> Looking forward to your progress. Should be a very lightweight effector! >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
