Hello, Although this page http://www.machinekit.io/docs/gcode/gcode/does not show G29, my BBB+CRAMPS KosselPro delta with 0.1.1483231405-1mk.travis.master.git51ed5154~1wheezy, has these files: /usr/share/linuxcnc/ncfiles/remap-subroutines/fdm/ g29_1.ngc g29_2.ngc g29.ngc
Is there more info on how to use these codes? Specifically, I'd like to add zprobe deploy/stow sequences before/after G29 for calibration. I found this and though it mentions machinekit, it lacks details: http://reprap.org/wiki/G-code#G29:_Detailed_Z-Probe Thanks! -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
