> On 20 Dec 2017, at 19:24, John Hammond <[email protected]> wrote: > > Thanks for info Schooner. > I copied files from BeagleBone Black to SD card.
Hi John, If you are running on a beaglebone black, how come you have a “parport”? what configuration do you use? Did you copy a configuration from a PC and use that? > The LinuxCNC Error file, I copied from terminal to clipboard and made txt > file. > Attached are the files. I get and error about parport 0 and will try to edit > hal file changing Loadrt parport "0 out" to Loadrt parport "0x378 out" (as > shown in LinuxCNC Forum #84912) next. I haven't looked at the hal file yet > but will within 2 hours. > Thanks, > John > > On Monday, December 18, 2017 at 4:22:14 PM UTC-8, John Hammond wrote: > Linuxcnc error terminal window appears, but nothing runs. > I can start linuxcnc by opening terminal window and entering “linuxcnc &” . > This stops when it does not find my configuration file. > I have copied the linuxcnc error message along with two other files that are > created. I am willing to attach those files if shown how. > Thank you, > John Hammond > > > -- > website: http://www.machinekit.io <http://www.machinekit.io/> blog: > http://blog.machinekit.io <http://blog.machinekit.io/> github: > https://github.com/machinekit <https://github.com/machinekit> > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/machinekit > <https://groups.google.com/group/machinekit>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. > <LinuxCNCerror.txt><linuxcnc_debug.txt><linuxcnc_print.txt> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
