Re: [Machinekit] What's the current status of Machinekit on DE0 / DE10 -nano-SOC?

[schoone...@btinternet.com]

My opinion, use the DE0-NANO-Soc It is known to work well and there are other people using it who can help you if you get stuck. The DE10 does not have a confirmed SD image ready to burn (not on our site anyway) and the 'development' was getting it to do the same as the DE0 already did, AFAICT. At some stage people will have to use the DE10, because the DE0 has been discontinued, but if you can get one use it regards On 10/01/18 13:13, Johan Jakobsson wrote: Hi, I'm plan on using Machinekit on a desktop CNC-router and thought I'd run it on either a terrasic DE0 or DE10 which I'd connect to a MESA 7i76 using Charles DB25 interface board  Reading through conversations I haven't got a good idea of how well Machinekit runs on those and which one is more stable. Which one would you recommend? Seems the DE0-nano-SCO works well and there is a guide on how to set it up on the website. On the other hand, DE10 is the newer board so I guess most of the development is focused that one.. or?  Regards Johan Jakobsson -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.