Fusion 360 from autodesk is $2500 for a commercial licence for one year, 
and it can do 5-axis swarf and contour following.  They will also 
practically give it to you for personal use.  Otherwise, RhinoCAM is pretty 
good at $10k, then things travel into the stratosphere at $20k+ (check out 

For what is sounds like you want Fusion 360 has all the functionality you 
would need. 

On Sunday, February 18, 2018 at 4:26:36 AM UTC-5, Damien D wrote:
> On 18 Feb 2018, at 09:53, Bas de Bruijn wrote:
>> On 18 Feb 2018, at 09:40, Damien D <damie...@gmail.com> wrote:
>> That's why I would like to know the list of G-codes command supported by 
>> Machinekit/LinuxCNC
>> They are here: http://www.machinekit.io/docs/index-user/#using-machinekit
> thanks,
> If anyone has already use Machinekit with 5axis simultaneous (ie. not only 
> 3+2axis) with TCP (Tool Center Point), I would be interested to know what 
> CAM they have been using and which configuration they have used for 
> kinematics :)
> And if anyone has some idea about the cost for a 5axis simultaneous CAM 
> software? <$1k?(I doubt), $1-5k?, $5-20k? more?

website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to