I finally found the perfect application for my old Beaglebone White.
However, I'm suspicious that it has fallen out of support.
RCN's latest 2018-02 MK image had a few problems in my short tests, such
as `sudo true` hangs the console; super long pauses during boot.
RCN's old Xenomai-based 2017-02 MK image works a lot better, but
`config-pin P9.20 hi` says "Pin is not modifyable [sic]: P9_20
i2c2_sda"; this is correct for the BBB, but on the original White, P9.20
was GPIO0_14.
I'll end up just rewiring to use pins common to both Black and White,
but is there any official support status for the White, both from RCN
and the MK project?
John
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
