I am trying to boot and log in over ethernet with ssh -X [email protected]. This works with the 2017-02-12 image uSD. I used Etcher to flash both the 2017-02-12 image and the 2018-08-20 image to uSD. With the 2018-08-20 uSD I am seeing the outboard three of four LEDs go solid blue. The inboard LED of the four is not lighting. However, they just stay solid -- no flashing. With the 2017/2/12 image the 4 LEDs go solid and then I see the typical flashing during the boot process.
Is there a problem with the 8/20 image? I am running this on an A6 BBB but I also tried it on a A5C BBB. Same results on both. I have a Xylotex DB25 cape on the board. Help!!! Thanks, Alan -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
