No, what you hit is the 'biggie', most other changes are in things not
available in linuxcnc or where legacy options are still operational.
eg. all components (nearly) are instantiable, but the old loadrt still
works.
I would sort out that section and retry. If you hit more problems, the
site has advice on seeking help, which includes the debug options
to get the required info to help you
On 1/3/2019 8:02 PM, Ross Lloyd wrote:
Thank you, I will work through my files and identify where the MK
format differs.
Out of curiosity, I've not seen one from a quick google and search of
the MK site, but do you have a linuxcnc to machinekit porting guide
available?
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
