Is this a conventional lathe? If so I thought that only had two axis "X" and "Z".
But maybe you are talking about a motorized tailstock? If so, I'd treat it more like a tool changer than an axis. It moves with a M-code. On Sun, Feb 10, 2019 at 11:40 AM Gediminas Dirma <[email protected]> wrote: > Hello, > > I am making lathe with machinekit and beaglebone. I have made > configuration for all axis except tailstock. I have a hard time to > understand what changes a should make in ini and hal file. I believe > changes should be made in traj section but its not clear to what parameters > i should change my values. > > Thanks for help > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
