On 2/26/2019 7:06 AM, Ömür Ceran wrote: > Actually ı am using cura with Ngcwriter extension.I sliced a stl file and > save it as a .ngc and upload in machinekit program.Machinekit shows the file > which ı uploaded but when ı run the program, it does not work. I should say > that, ı did not connect any sensor or motor yet. Can it be about temperature > sensor?
That is definitely a possibility. > Also ı want to ask you, there is no code which is velocity extrusion enable > or how many extruder is connected(for definition) in your configuration. > Before adding them,machinekit gave a problem for that. Do ı need to add them? > I know that 'A' is used for extruder but ı used remap code(gcode to mcode). I do not currently have any machine configurations setup for velocity based extrusion, all my machines use "conventional" position commands for the extruder axis. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
