Hello, I was unaware that you posted here. Try this idea and please let me know if it works:
sudo /sbin/route add default gw 192.168.7.1 echo -e "nameserver 8.8.8.8\nnameserver 1.1.1.1" | sudo tee -a /etc/resolv.conf >/dev/null Seth P.S. I found that on a person's github page. It may work. On Thursday, March 14, 2019 at 3:59:56 AM UTC-5, Sardar Vayghannezgad wrote: > > Hi all, > I have been struggling for the past ten days, as a brand new user, to get > my Beaglebone Black rec C (element 14) to run Machinekit on my Win 8.1 PC. > To save you the long story, I am totally lost. What I've been able to learn > during > my time playing with all the software and hardware around me from forums, > blogs, sites, personal intuition, etc comes down to: > > - successfully flashing an image on a microSD card and then transfer > them on to the BB-Black, so that it can run without the flash card inside, > - connecting BBB to my PC via puTTY and to the internet (albeit, > apparently Google only, as I cannot have puTTy download any packages) > > Since I am desperately looking for some dummies pointers on the issues I > have, I'm giving all the software/hardware coordinates I think are > important: > > The image I'm using is from here > <https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit> > > My Questions are: > > 1. BBB does show up on my PC with the default image > <https://beagleboard.org/latest-images> > it comes out with, and I can go through the instructions available on > Beagleboard/getting > started webpage <https://beagleboard.org/getting-started#step2> > , but once I replace it with another Image > > <https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit> > , it doesn't seem to appear as a drive on my PC nor anywhere on the > Device Manager. However, I can putty it to my PC, and share my PC WiFi > with > it. Given that I have installed the required drivers from BBoard > Getting Started <https://beagleboard.org/getting-started#step2> > , Is this normal?!! If not, What is it that causes this? (I have > searched high and low online, but haven't come up with a concrete > conclusion) > 2. I can use my PC WiFi to connect BBB to the Google per online > instructions, yet any attempt, via puTTY, to download Machinekit > Packages > <http://www.machinekit.io/docs/getting-started/install-runtime-packages/> > (Just in case, is the link right for my case?!!) from the related > website leads in the error: > > machinekit@beaglebone:~$ sudo apt-get install machinekit-xenomai > Reading package lists... Done > Building dependency tree > Reading state information... Done > E: Unable to locate package machinekit-xenomai > > > or > machinekit@beaglebone:~$ sudo apt-get install machinekit-posix > Reading package lists... Done > Building dependency tree > Reading state information... Done > E: Unable to locate package machinekit-posix > > 3. I have downloaded the Machinekit Client on my PC. What > else do I need? I can see online that I need download tightVNC viewer both > on my PC and on the BBB via puTTY. right? Provided that I can do so, do I > need to download a VCP (Visual Control Panel) like QtQuickVcp to use in > conjunction with Machinekit? Should I install this on my PC or BBB or > both?!!! > > 4. My keyboard is misspelling on ThightVNC window. How can I > fix this? > > Any help, however small, would be appreciated. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
