> On 20 Mar 2019, at 03:57, Daren Schwenke <[email protected]> wrote: > > I guess unless some of you work for Nvidia, someone having one already is > pretty unlikely. > Arrow shows 16 weeks. Sparkfun doesn't have a date. SeedStudio shows Apr > 12th! > Here's hoping... > Anyone figured out what monumental tasks would have to take place to run on > Ubuntu 18.04/LTS kernel 4.9 anyway?
I guess that most important task would be how to access the gpio from HAL. But I’m no authority on how to check/do that :) > >> On Tuesday, March 19, 2019 at 10:08:40 PM UTC-4, Daren Schwenke wrote: >> I just got a little bit excited as a powerful machine vision platform in a >> small and relatively inexpensive form factor just happened. >> 128 Cuda cores... >> It even has a Pi camera slot onboard. >> Ok... a lot excited.. >> >> https://www.nvidia.com/en-us/autonomous-machines/embedded-systems/jetson-nano/ >> >> This would be absolutely perfect for running OpenCV with the P1. >> >> Now the question becomes... how would one go about getting Machinekit >> running on this? >> I know it has 40 pins of gpio and onboard ethernet. >> I will design a daughterboard for it. >> >> Anyone got one already to try it out? >> Supposedly it runs a variant of Ubuntu 18.04 LTS with LTS kernel 4.9. >> >> > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
