Hi guys, If I am out of line here with linuxcnc please let me know. I dont want to step on anyone's toes but I need to ask.
I have a machine with three spindles, only using one, and 33 drop drills on one motor and 9 horizontal drills. It is a big commercial Biesse 346 router. I remapped M6 with pure python, and everything seems to work. A few issues that I had to work around: The change epilog I cannot get to run unless it is in the remap body itself. So I just use REMAP=M6 modalgroup=6 python=M^_Remap_BiesseRover346 in the ini. I run the change_epilog1 as a funtion inside the remap. This works everytime without any issues as far as I can see. The only way I can get epilog commands working re: emccanon_CHANGE_TOOL, set_tool_parameters() and toolchange_flag is to put them inside the remap body. If I try to put them in a function in the remap file they wont run. Everything is working now as I seem to have pacified the interpreter but, I cannot run any yield's. IT spits something about not being a generator. I am a bit worried because I am not letting the ionterpreter catch up on a queuebuster. Here is my code. https://github.com/bobbevins/Linuxcnc_python_remap_M6 What are your thoughts? Thanks, Bob -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
