I suggest you start touchy and then you start halmeter to inspect the hal pins to check if things are wired correctly and if your inputs work. That's how I did it.
Touchy exports some hal pins so you need to: - set the general hal magic in the main hal file - wait for touchy to start - make some other connections in a postprocess step Above code may or may not be correct, that depends on your machine. If touchy does not start, please provide the error message. If other GUIswork then the postprocess step might be missing Am Di., 7. Mai 2019 um 10:21 Uhr schrieb <[email protected]>: > I wired my MPG > > in my setup.sh file there are > > > > > *pins hardward MPGP9_22 in #IN-ENCODER-BP9_24 in > #IN-ENCODER-A* > > > > > *pin hardward AbordP9_28 low #AUX-05pin hardward cycle-startP9_30 > low #AUX-06* > > then I added in my.hal file > > > > > > *newsig button.abort bitnewsig cycle.start bitnet button.abort <= > bb_gpio.p9.28* > *net cycle.start <= bb_gpio.p9.30* > > Is that correct so far? > > @++ Jean Claude > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Robert Hirsch und Malte Schmidt Adverrun Drives Fruehlingstr. 41 90537 Feucht [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/CAA%3DS-LuKPs3276Q8o2rOzc11bVcK3pB%2BErEa4sEZFphiOeW-hw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
