Besides the 1024x768 (VESA) there are the HD,, (1920 x1080) configs. What missing screen resolution are you referring to?
On Sat, 20 Jul 2019, 16.03 Michael Brown <mib.holotro...@gmail.com> wrote: > Monitor resolution is fixed. Changes are done in the qsys video frame > buffer cores. > > On Thu, 18 Jul 2019, 01.59 justin White <blazin...@gmail.com> wrote: > >> I used 2 instances of SSerial in the pinfile which was incorrect. I'm >> told 1 instance covers 8 SSerial channels. I built a new .rbf with 1 >> instance and still couldn't get it to work. PCW confirms that the >> encoder/stepgen thing should work just fine so I'm pretty much out of ideas. >> >> On a side note, how might I go about changing the framebuffer resolution >> to the HDMI? Only certain monitors will display anything from the DE10 >> which makes it kind of a PIA to test this as I have to drag another monitor >> down to my mill since my mill's monitor wont display the Nano. The way it's >> achieving a resolution doesn't seem standard as no standard method of >> changing it from 1024x768 seems to work. >> >> On Sunday, July 14, 2019 at 5:25:31 PM UTC-4, justin White wrote: >>> >>> There was something wrong with my build environment, deleted it and I >>> was able to get a good .rbf. >>> >>> I wasn't able to get this working with my 8i20 though. I added >>> "sserial_port_0=00xxxx" to the config line as in my other sserial configs. >>> >>> I'll probably hold off on anymore testing until I get a board fabbed >>> with dedicated serial hardware, but the firmware could probably use some >>> looking into. >>> >>> On Sunday, July 14, 2019 at 6:08:13 AM UTC-4, justin White wrote: >>>> >>>> Any insight on the issue with the rbf? >>> >>> -- >> website: http://www.machinekit.io blog: http://blog.machinekit.io >> github: https://github.com/machinekit >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "Machinekit" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/machinekit/eVhvTnuhblE/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> machinekit+unsubscr...@googlegroups.com. >> Visit this group at https://groups.google.com/group/machinekit. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/machinekit/a35860c4-494e-4daa-8d65-5ed926dbc0af%40googlegroups.com >> <https://groups.google.com/d/msgid/machinekit/a35860c4-494e-4daa-8d65-5ed926dbc0af%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/CAGKWNWMYu-QE60QUEJhhGOv-%3D8uLfjoTdpM2-Gw%2Bs_osmrQFYg%40mail.gmail.com.