I've got a MaslowCNC and there's discussions on moving off of the 8bit
Arduino and PC software to an integrated system.
Since the Maslow CNC is a CNC machine, but not your typical one, my
thoughts went directly to Machinekit. So I thought I'd ask if anyone
knows of any previous work on Machinekit for a hangbot. The Maslow CNC uses
2 geared DC motors with encoders with chains hanging down
and connected together at the router motor.
M1 M2
--\ /--
\ /
\ /
V
router
knowing there's some code to work with already might help.
Two main features of interest: hangbot kinematics and DC motor encoders.
Thanks.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/machinekit/db8efc36-972c-437e-b21c-6fb5951fc89e%40googlegroups.com.
