On a BBB with a CRAMPS V1.0 board I re-flashed the onboard flash memory with the latest release bone-debian-9.9-machinekit-armhf-2019-08-25-4gb.
I then edited the /boot/uEnv.txt file to the following taking the measure to remove the useless commented out lines for clarity #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 uname_r=4.19.59-bone-rt-r36 enable_uboot_overlays=1 uboot_overlay_addr0=/lib/firmware/cape-universal-00A0.dtbo disable_uboot_overlay_audio=1 disable_uboot_overlay_wireless=1 uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo enable_uboot_cape_universal=1 cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet then rebooted and called machinekit from the command line AXIS comes up fine but NOBODY is home, nothing moves it's as though the CRAMPS board is not even there. Is the uEnv.txt file correct? Any other suggestions as to resolving the absence of functionality? On another note, the getting started notes at machinekit.io suggest that one should start with an older Jessie distribution, however the link does not have the recommended file, where can one find the older releases? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/cc864fa9-b09b-4412-ba89-bd6a96854af2%40googlegroups.com.
