I can't seem to configure P8.46 as an output. I've tried P8.40 up to P8.45 and they seem to be fine but using P8.46 I don't get an output signal. Is there anything special about this pin?
for testing I use halrun: halcmd: newthread servo nofp 100000000 halcmd: loadrt hal_bb_gpio output_pins=845,842,844,846 halcmd: addf bb_gpio.read servo halcmd: addf bb_gpio.write servo halcmd: start halcmd: setp bb_gpio.p8.out-46 1 halcmd: setp bb_gpio.p8.out-44 1 halcmd: setp bb_gpio.p8.out-42 1 halcmd: setp bb_gpio.p8.out-45 1 I don't _have_ to use P8.46, mostly just trying to understand. Thanks, Markus -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/16a0abb5-5539-4147-bb06-e0698abbeba6%40googlegroups.com.
