@Justin I just put a new suggestion into the git thread...
On Sunday, 29 September 2019 20:01:43 UTC+2, justin White wrote: > > @Michael, > > Yeah I tried it and same results. I posted a response on git. I just blew > up the brake resistor on my mill so I pulled the 8i20 out and it's on the > desk. I did re-verify that merely just plugging the 8i20 into the 7i96 SS > port on my other LCNC machine results in the 8i20 having 0 comm errors and > a status heartbeat without a HV power supply or Motor attached. My nano is > all setup for SSH/VNC so if you want I can give you connection details and > you can see if you can get MK-hal working with it. Seems like it's a > handshake issue, as I said the other SS cards auto-discover, the 8i20 > relies on the SS driver having certain knowledge of the card. > > I must admit to having near zero experience with SSH/VNC, so initially (for me as a HW guy) it would seem to me a lot like trying to debug via poking a stick thru a hole in the dark ... :-) -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/1754dcbc-e8d9-4a79-adbc-69fcc74253fe%40googlegroups.com.
