Full disclosure: this is not really Machinekit question but since this community has people who might know I'm posting here, hope it is allowed. I'm really trying to interface this pendant to macOS.
I just got my whb04b-6 delivered. WIthout even trying it, I was worried as the USB dongle sounds like there is some springy thing dangling inside (antenna?), is that normal? When I plug it in I get Lost Rf in the screen, unless I press some button after which I get the DRO XYZ screen, for a while but eventually it will disappear. In that state it shows full strength signal next to the antenna symbol, the batter indicator shows empty (I have new batteries that I have measured) and the asterisk is next to the selected axis display. Then I I run my software that simply shows the Input Reports that this HID device sends. In a few seconds after starting my software I get the 'Lost Rf' screen. But I still get the Input Reports as per the known protocol when I press the buttons. However the wheel delta info in those messages is 0x00 unless I press a button or turn a knob to bring back the DRO display and I get the wheel delta as long as the DRO display is visible. No matter what I send to the device it has no effect on the display. (I'm sending feature reports with report ID 6 as I think at least the Machine kit driver is using). To me this looks like the radio link from computer to pendant is not working but from pendant to computer is working. And this is likely causing all the problems? Now, the real question is if this is just a hardware issue or if there is some secret sauce, like a code I need to send to the pendant to start the rf link to work? The details of the behaviour are slightly different if I observe the communication with a Beagle 480 analyzer and/or if UBS wireless dongle is plugged into a PC. Looking at the communication with beagle I see very little difference between Mac or PC so I attribute the difference to how the USB port hardware supplies the power or something like that. But the main question really is if there is some ingredient I'm missing or did I just have bad luck and received a faulty product?? Thanks Kusti -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/0bfc3971-d721-437e-bb4f-5e2408949e09%40googlegroups.com.
