Hello, thank you for the writeup! Have you seen this: https://github.com/zultron/linuxcnc-ethercat ? It is able to produce packages in Github Actions CI workflow.
Cern. Dne pondělí 4. ledna 2021 v 23:26:22 UTC+1 uživatel Moronic Smurf napsal: > These are some of my notes from building the packages of > Machinekit/linuxcnc and getting linuxcnc-ethercat packages built in > conjunction with the ethercatlabmaster packages. > > Hopefully this wil help some other poor schmuck trying to get ethercat > servos running. > But at this point in time i'm giving up. Mainly cuz machinekit build > process is seemingly terribly broken and/or confusing. > > Link. > https://gist.github.com/NeoTech/434c6f93e6c5e2471f8b2505b9d2f56c > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/53776060-f7c5-4e72-a555-0dd5e9a00333n%40googlegroups.com.
